Ninka Qanto R4 Instructions De Montage page 16

25.
26.
16
All manuals and user guides at all-guides.com
27.
Step 25:
Place the counters on the cabinets
Step 26:
Connect the counters
!
WARNING
The screws must not protrude through the
counter/worktop as this will damage the
surface and may lead to injury. Ensure
that the cable is not damaged or squee-
zed as this may lead to electric shock.
Step 27:
Screw the counters to the accompanying
cabinets.The screws are NOT included in
the scope of supply. Pay attention to the
correct screw length! The screws must
not protrude through the counters or
damage their surface..
Qanto_Id_A4_00000.50.065050_US
EN