Items Supplied; Transport / Storage; Product Description; Before Initial Operation - Cleco Celltek Ctbp Manuel D'instructions

1
EN
3

Items Supplied

Inspect the product for shipment damage and ensure that
all items have been received:
• Correct product (without battery pack)
• Instruction manual
• Declaration of conformity
• Warranty
4

Transport / Storage

Transport or store in the original packaging. Disconnect the
power supply during storage. The packaging is recyclable.
Refer to the 9 Ambient conditions, page 12.
5

Product Description

Battery powered hand held nutrunner used for the tighten-
ing / loosening of threaded fasteners:
• Work Light for secondary okay/not okay visual feed-
back
• "Stay Alive" function prevents reboot during battery
pack change. Stay alive time = 20 sec.
• On-tool Digital Transducer and Servo provide critical
information and eliminate errors
• Connects easily over WLAN and Bluetooth 4.0.
Index Description
1 Display
2 Function Keys
3 Output Drive
10
All manuals and user guides at all-guides.com
Display/Run Screen
Default Settings:
LED Work Light
Default Settings:
LED
6
Charge Battery Pack
Battery pack is supplied partly charged and must be
charged completely being used for the first time.
 See Original Instructions Milwaukee charger.
 Do not use any other battery packs / chargers than the
Battery Pack 18 V
P2543BA | 2021-01
Index Description
4 Work Light
5 LED showing OK or NOK
6 Reverse switch
7 Start Trigger
8 Battery pack
9 SD card
10 Micro USB-B Port
11 Socket + u-Guard (optional accessory)
White Green
Tool running OK rundown
Blue Green
Tool running OK rundown
LEDs Operating status
Continuous Active
green light
Continuous Active
red light
Flashing light Energy saver
Green – mode
low frequency
Off Sleep
If linking is selected on the controller:
Green flash- Active/Setting:
ing light – Linking
high frequency
Flashing red Active/Setting:
light Linking

Before Initial Operation

following:
Order no. Capacity
T50-1000497 2,0Ah
T50-1000498 5,0Ah
Red
NOK rundown
Red
NOK rundown
Result
after fastening
cycle
OK
NOK
Linking OK
Linking NOK
Apex Tool Group