Miele Dynamic U1 SH 3 Série Mode D'emploi page 46

en
Problem
The Electrobrush
switches itself off. The
Electrobrush indicator
light will continue to
light up yellow.
46
Cause and remedy
The overheating protection mechanism has been ac-
tivated due to overheating or a blockage, for example.
 Switch the Electrobrush and the vacuum cleaner
off, switch off at the wall socket and remove the
plug.
 Check the vacuum cleaner for any blockages and
check all the filters in the vacuum cleaner.
The Electrobrush has to cool down. To speed this up:
 Reconnect the vacuum cleaner to the mains sup-
ply and switch it back on.
 Vacuum for approx. 10 minutes without switching
the Electrobrush on.
This will cool the Electrobrush down so that it can
then be used again as normal.