USB / SD CARD PLAYBACK
This boombox supports USB/SD drive sizes of up to 32GB (FAT 32 Format).
1. Insert an SD or USB device into the SD or USB slot.
2. Press the SOURCE button until the display switches to SD or USB
mode, whichever is desired. The boombox will take a moment read
the files and display a file count.
3. Press
4. Press
5. To stop playing , press STOP.
During playback, press and hold
track that is playing.
BLUETOOTH CONNECTION AND PLAYBACK
This boombox allows you to connect mobile devices, such as your phone, to
play back through the boombox speakers.
1. Press SOURCE until the display shows "BT"
2. The unit may now attempt to connect to a previously paired device.
If not, perform a BlueTooth scan from your phone or other BlueTooth
sound source and pair with the boombox, which is "CDB490-BT".
3. After pairing is successful, the "BT" indicator will stop flashing.
You can now start playing music on your other device through the
boombox.
Depending on the device used, you may be able to use
and pause, or
To disconnect the BlueTooth device or search for a new BlueTooth device, press
and hold the PAIR button.
AUX IN (AUXILLARY INPUT)
You can connect audio devices such as a phone, mp3 player or other device
with a 3.5mm output to the boombox's AUX input. Connect the device, then
press the SOURCE button until the display switches to AUX mode. You can
now play back music from your connected device. Adjust the volume on the
device and boombox as needed.
to begin playing, or to pause.
or
to select the next or previous song/track.
/
to select the next or previous song/track.
–9–
or
seek forward or backward on the
to play