Publicité
GETTING STARTED
BATTERY INSTALLATION
The boombox takes 6 C batteries. It also plugs into an outlet with the AC cable
provided, so batteries are not necessary.
Unplug the boombox from the wall before installing batteries!
To install batteries into the boombox:
1. Open the battery cover on the bottom of the boombox.
2. Insert the batteries, matching the "
3. Replace the battery cover.
If the boombox unit is not used for an extended period of time, remove the bat-
teries before storing it.
SETTING THE TIME
1. Make sure the unit is off (in STANDBY mode). Press STANDBY to
turn the boom box off if necessary.
2. Press and hold the PROGRAM Button. The time will flash.
3. Use the previous (
4. Press PROGRAM to continue.
5. Use the previous (
6. Press PROGRAM to complete the time setup.
POWERING ON THE BOOMBOX
If the boombox is off, press the STANDBY button to turn it on.
Press the SOURCE button multiple times to access the different modes on
the boombox. Press the SOURCE button until the desired mode is selected.
The source button cycles through the different modes in the following order:
AM / FM / CD / USB / CD / BT / AUX
The display on the front of the boombox should indicate the current mode.
We'll discuss in the next sections how to use each mode.
(BATTERIES NOT INCLUDED)
+
" and "
) and next (
) buttons to set the hour.
) and next (
) buttons to set the minute.
–7–
–
" signs with the batteries.
Publicité
