Publicité
Replacing the M/Connect Hub
1
Remove any cables or devices plugged into the M/
Connect Hub
2
Remove the top cover by carefully pulling up around
the edges ①
3
Using a 3mm hex key, remove the screw retaining the
bridge/accessory cable and unplug the cable ②
4
Using a 3mm hex key, remove the center locking
screw ③
5
Slide the M/Connect Hub away from the back of the
desk and then lift up to remove ④
6
Follow the steps in reverse to install the replacement
Hub.
①
②
③
④
13
Publicité
