Stryker SDC Ultra Mode D'emploi page 37

Editing Channel 2 Video Settings
To edit channel 2 video settings, press the Video Settings button on the Capture
screen and then press the Channel 2 Video Settings button.
2
1. Select the Record Format from the drop-down menu. This will be
enabled only if the DVD write format is DVD Data and channel 1
recording format is MPEG 2 HD.
2. Select the Signal from the drop-down menu.
Editing PIP Settings
To edit PIP settings, press the Video Settings button on the Capture screen and
then press the PIP settings button.
1
2
1. Press the corresponding quadrant to display the location of the picture
in picture.
Press the PIP Size button to set the size of PIP to small or regular.
2.
All manuals and user guides at all-guides.com
1
31