Gardena Select 1891 Manuel D'utilisation page 16

3. FUNCTION
v (Fig. F)
You can change the settings or move to the next
setting by turning the knob. You can confirm the
respective input by pressing the rotary knob.
Pressing the knob for a minimum of 3 seconds
locks or unlocks the display.
Time Active Watering
Connected
sensor
Sensor
Programs
P1
Start Time
(0 – 23) hrs (0 – 59) min.
Run Time
hrs
(0 – 7) hrs (1 – 59) min.
Mo Tu We Th Fr Sa Su
ON
Frequency
(weekdays)
*
max. 1 year
If you will be away for long periods of
min. 4 weeks
time, please replace the battery when
the battery symbol blinks – otherwise
max. 4 weeks
the watering system may fail.
16
Battery
Condition *
Soil Moisture
0 – 3 drops =
P2 P3
very dry /
rather dry /
humid /
very humid
min
Today
OFF
Schedule
active /
deactive
too weak for opening again
4. PROGRAMMING
Fig. G:
1 Set time (hours) | 2 Set time (mins) |
3 day setting (Mon ‒ Sun) | 4 Ready for schedule
Fig. H:
1 Select schedule | 2 Set schedule |
3 Confirm schedule | 4 Device programmed
P1, P2, P3 denote watering schedules. You can
save up to 3 independent schedules. Irrigation
days must be selected and confirmed individ ually.
The current weekday will be underlined.
By pressing On / Off, schedules can be activated
or deactivated individ ually.
Soil Moisture Sensor v (Fig. D and I):
After a soil moisture sensor is connected, the
word "Sensor" will be displayed – this can take
up to 1 minute.
Once the soil is sufficiently moist, a watering
operation as per schedule will not be carried out.
This does not affect active (manual) watering.
Soil Moisture Sensor, Art.1867
(optionally available)
1 Connecting the sensor
An operating point must then be defined.
This is the soil moisture level at or above which
watering is not to be carried out (see GARDENA
Soil Moisture Sensor Operating Instructions).
There are 3 levels to choose from.
– During normal operation, the currently measured
level is displayed constantly.
v (Fig. G – J)