Danby DOM16A2SSDB Manuel D'installation page 23

Masquer les pouces Voir aussi pour DOM16A2SSDB:
Table des Matières
Les langues disponibles

Les langues disponibles

INSTALLATION INSTRUCTIONS
Install grease fi lters
Slide the grease fi lters into the openings in the bottom of the microwave
until they click into place. The appliance should not be operated without
the grease fi lters installed.
Air recirculation
There is no duct work required for this type of installation. Air from the
appliance will exhaust through the front vent and recirculate into the air
in the room.
Charcoal fi lter
The charcoal fi lter should be used in non-vented, recirculating
installations. The fi lter should be changed every 6 to 12 months
depending on use.
1. Remove the two screws securing the louver on the front of the
microwave.
2. Remove the used charcoal fi lter.
3. Install the new charcoal fi lter. The wire mesh of the fi lter should be
visible from the front.
4. Reinstall the louver.
22
Table des Matières
loading

Table des Matières