Defrosting should be done twice a year or when a layer of frost of about 7 mm
(1/4") has formed.
Defrost water drain:
1. The defrost water drain outlet is placed on the underside of the freezer. Place
a sufficiently large water container near the drain outlet.
2. Extract the water conduit by 20-25mm until the water hole can be seen.
3. Twist the water conduit until the arrow points downward.
4. After defrosting is done, make sure there is no more water coming out before
put the water conduit in place and make the arrow point upward.
CLEANING
Before cleaning, unplug the appliance and remove any loose items.
Preferably use a soft cloth dampened with lukewarm water and a mild detergent.
Never use abrasive cleaning products. Wipe with a soft cloth dampened with
water. Avoid getting water into the control panel.
The lid gasket requires regular cleaning to prevent discoloration and to ensure its
longevity. Use clear water. After cleaning the cover seal, check that it still fulfills
its role.
The ventilation grid must be clean. Clean it with a vacuum cleaner.
In case of prolonged absence, unplug, empty and clean the appliance and leave
the lid open to prevent the creation of unpleasant odors.
EN-19