Optional Accessories - Makita BV4500-118 Manuel D'instruction

1. Insert the blind rivet or lockbolt into the nose
piece.
1 2
Fig.13
► 1 . Blind rivet 2. Nose piece
2. Press the tool tip against the workpiece, and then
pull the switch trigger. After the mandrel is broken off,
release the switch trigger.
Fig.14
Before the mandrel container becomes full, empty it
regularly by removing the mandrel container.
Installing a lockbolt (without
breaking off a mandrel)
1
Fig.15
► 1 . Pin 2. Collar
1. Insert the pin into the hole. Attach the collar to the
pin.
2. Fit the hole of the nose piece on the pin, and then
press the tool against the collar. Pull the switch trigger.
The tool stops automatically after the collar is tightened
with the specified force.
3. Release the switch trigger and withdraw the tool.
2
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Nose assembly
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
9 ENGLISH