Installation And Connection Information; General Information; Terminals And Jumpers - Minebea Intec Mp 90/04 Manuel D'installation

Cable Junction Box MP 90/04

4 Installation and connection information

4.1

General information

4.2

Terminals and jumpers

Minebea Intec
- Only use the cable glands provided by the manufacturer.
- Install the junction box so that the cable glands are on the bottom.
- Do not open the junction box when connected to the voltage supply.
Note:
At ambient temperatures >45°C, cables that are suitable for at least 85°C must be used.
Signal + green
Signal - gray
Supply - blue
Sense - black
Terminal contacts + measuring voltage (load cells)
1–4
Terminal contact + measuring voltage (connection cable)
IND
Terminal contacts - measuring voltage (load cells)
1–4
Terminal contact - measuring voltage (connection cable)
IND
Terminal contacts - supply voltage (load cells)
1–4
Terminal contact - supply voltage (connection cable)
IND
Terminal contacts - sense (load cells)
1–4
4 Installation and connection information
EN-10