Peg-Perego Viaggio Shuttle 120 Mode D'emploi page 20

Installing the booster seat in the vehicle
5. To release Viaggio
Shuttle 120
vehicle seat, pull the
handle (1) and the seat
until the release buttons
on the side of the base are
fully revealed. In so doing,
the yellow release buttons
will be visible on the sides
of the base; pull the two
buttons (2) until you hear
the attachments
open. At this point you can
remove the car seat.
6.
To reposition
connectors inside the base
(when not in use), pull the
lever once more (1) and
simultaneously push one
of the two connectors in (2)
until they disappear.
from the
click
the
20
2
1
2
click
1
H
bo
se
la
7.
Sh
on
th
le
in