Getting Started - TD Systems K24DLM10H Manuel Utilisateur

Wall Mounting
The TV is provided with mounting holes for a VESA approved wall mounting bracket
(NOT SUPPLIED). The VESA mounting pattern is
the base to the base bracket and lift the base away (do not remove the base mounting
brackets). Mount the VESA bracket using
supplied). Do not use screws longer than
components.
Caution: Your new TV is heavy; please consult with a professional wall mount installer
to perform this installation.

Getting Started

Front/Back View
Button Functions
1. : Turn on TV/Standby
2. ENTRADA: Audio/Video input source selection
3. MENÚ: Open settings menu
4. VOL-: Decrease volume
5. VOL+: Increase volume
6. P-: Previous channel
7. P+: Next channel
8. IR RECEIVER: Receives infrared signals from the remote control
9. INDICATOR LED: Status indicator
100 x 100. Remove the screws holding
4 x M4 x 12 isometric threaded screws (not
12 mm; damage will occur to the internal