signia CROS Pure 312 X Guide De L'utilisateur page 8

Switching to standby mode
Via remote control or smartphone app, you can switch
your device to standby mode. This mutes the device.
When you leave standby mode, the previously used
volume and hearing program are set.
Note:
●
In standby mode, the device is not turned off
completely. It draws some power.
Therefore we recommend to use standby mode only
for a short period of time.
●
If you want to leave standby mode, but the remote
control or app is not at hand: Turn your device off and
on again (via rocker switch or by opening and closing
the battery compartment). In this case, the default
volume and hearing program are set.
14
Inserting and removing the transmitter
Colored markers indicate the side:
●
red marker = right ear
●
blue marker = left ear
Inserting:
For Click Sleeves, take care that the
X
bend of the Click Sleeve is in line with
the bend of the receiver cable.
Correct:
Incorrect:
15