signia CROS Pure 312 X Guide De L'utilisateur page 10

Removing:
Lift the device and slide it over
X
➊
the top of your ear .
If your device is equipped
X
with a custom shell or a
Click Mold, remove it by
pulling the small removal cord
toward the back of your head.
For all other ear pieces: Grip the receiver in the
X
ear canal with two fingers and pull it carefully out
Do not pull the receiver cable.
CAUTION
Risk of injury!
In very rare cases the ear piece could remain
X
in your ear when removing the device. If this
happens, have the ear piece removed by a
medical professional.
Clean and dry your device after usage. Read more in
section "Maintenance and care".
18
Changing the hearing program
Depending on the listening situation, your device
automatically adjust their sound.
Your device may also has several hearing programs
which allow you to change the sound, if needed. An
optional signal tone can indicate the program change.
To change the hearing program, press the rocker
X
switch briefly.
Refer to section "Controls" for the setting of the rocker
➋
.
switch. Refer to section "Hearing programs" for a list of
your hearing programs.
The default volume is applied.
Bluetooth
Your device is equipped with Bluetooth wireless
technology to enable audio streaming from mobile
phones or other compatible devices.
In an airplane, the use of Bluetooth functionality may be
restricted, especially during take-off and landing. If this is
the case, please switch off your device.
19