Publicité
Les langues disponibles
Les langues disponibles
8820003 Black-2 Variable Shade Auto-Darkening Welding Helmet
1.
Low Setting - suitable for high amperage welding and
welding in areas with high levels of natural sunlight.
2.
Medium Setting - suitable for most indoor and outdoor
welding.
3.
High Setting - suitable for low amperage welding and
welding in areas with low light conditions, especially for
low amperage argon-arc welding.
GRINDING MODE
You can also use the welding helmet to protect your face during
grinding. Select grind mode by pushing the shade control (#3)
lever to the top. This will prevent the filter cartridge from
darkening when bright sparks are created.
TEST BUTTON
Press the test button on the auto-darkening filter (#2). The red
battery indicator light will glow and the filter will darken to
indicate the electronics are functioning.
Replace the battery if the battery indicator light is dim. Replace
the filter if the battery indicator light is bright, but the filter
does not darken.
MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace
damaged or worn components.
3.
When servicing, use only identical replacement parts. Only
use accessories intended for use with this tool. Replace
damaged parts immediately.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
8
For technical questions call 1-800-665-8685
V1.0
Publicité
