Publicité
Les langues disponibles
Les langues disponibles
!
Press the "Menu"
key.
!
Use
and
key to select "HS Settings".
!
Press the
"Select"
key.
!
Use
and
key to select "HS Name".
!
Press the
"Select"
key.
!
Enter the name of the handset (max. 12 digits) with the alphanumeric
keys (you can use the "Erase"
necessary).
!
Press the "Save"
key.
Notes:
When you make an internal call to another handset, "HS N Calling" will
appear on this handset instead of the name given by you.
22.7 Automatic answering (Auto Answer)
This function allows you to answer a call by simply picking up the handset,
without pressing any key.
!
Press the "Menu"
key.
!
Use
and
key to select "HS Settings".
!
Press the
"Select"
key.
!
Use
and
key to select "Auto Answer".
!
Press the
"Select"
key.
!
Use
or
keytoselectONorOFFtoenableordisablethefunction.
!
Press the "Save"
key. You will hear a confirmation beep.
Factory default: On
22.8 Setting date and time (Date & Time)
!
Press the "Menu"
key.
!
Use
and
key to select "HS Settings".
!
Press the
"Select"
key.
!
Use
and
key to select "Date & Time".
!
Press the
"Select"
key.
!
Use
or
key to choose between "Date Format", "Time
Format","SetDate"or"SetTime".
Press the "Select"
key. The display shows the current setting.
Date Format
!
Use
or
key to select "DD-MM" (DayDay-MonthMonth) or
"MM-DD" (DayDay-MonthMonth).
!
Press the "Save"
Time Format
!
Use
or
key to select "12 - Hour" or "24 - Hour".
!
Press the "Save"
Set Date
!
Enter the date with the numeric keys 0 to 9.
!
Press the "Save"
"Alarm" appears.
key to erase the last digit, if
"Alarm" appears.
The display shows the current setting.
"Alarm" appears.
key.
key.
key.
Set Time
!
Enter the time with the numeric keys 0 to 9.
!
Press the "Save"
Factory default: Date Format: DD-MM, Time Format: 24 - Hour
22.9 Selecting a base (Select Base)
This function allows you to select a base from those already registered to the
handset (up to 4 bases can be registered to one handset).
!
Press the "Menu"
key.
!
Use
and
key to select "HS Settings".
!
Press the
"Select"
key.
!
Use
and
key to select "Select Base".
!
Press the
key.
"Select"
!
Use
or
key to select the desired base.
!
Press the "Select"
handset will sound a warning tone. After a short time, a confirmation
melody will sound, and the name of the handset will change
respectively.
Note:
The handset will only work with the base it has last been registered to, or with
the selected base.
22.10 Resetting the handset (HS Reset)
!
Press the "Menu"
key.
!
Use
and
key to select "HS Settings".
!
Press the
"Select"
key.
!
Use
and
key to select "HS Reset".
!
Press the
"Select"
key.
!
Enter the current PIN code.
!
Press the "Reset"
settings will be returned to the factory default. Otherwise a warning
sound will be heard and the settings will remain. After resetting, the
handset will return to standby mode.
23. Registering a handset to a base
(Registration)
The supplied handset is already registered with the number 1. You can
register up to 5 handsets/door units to the same base (see chapter 28
"Optional accessories"). A handset can be registered to up to 4 bases.
!
Press and hold the key [59] on the bottom of the base for at least 5
seconds.
!
Press the "Menu"
key.
!
Use
and
key to select "Registration".
!
Press the "Select" key
key.
"Alarm" appears.
The display the shows the current base.
key. If you select a non-existent base, the
"Alarm" appears.
The display shows "PIN ?".
key. If the PIN code is validated, all Base
.
GB - 51
Publicité
