Saba LVS10C42MINI-PLIX Mode D'emploi page 80

Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the
dishwasher is designed to adjust the consumption by user. Follow
the below steps.
1. Open the door and switch on the appliance.
2. Within 60 seconds after step 1, press the Program button
more than 5 seconds, and then press the Delay button to
enter the set model, the rinse aid indication blinks as 1Hz
frequency.
GB
3. Press the Program button to select the proper set according
to your using habits, the sets will change in the following
sequence: D1->D2->D3->D4->D5->D1. The higher the
number, the more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or press the Power button to
complete the setup and exit the setup mode.
20