DAZE Dazebox Home Manuel D'installation page 23

EN
15 - Warranty
Dazebox Home can only be opened by qualified personnel. Before performing any installation, cleaning, or decommissioning
procedures on Dazebox Home, disconnect the device from the power grid.
Product Care
Dazebox Home should be inspected to prevent potential damage to the casing and components. In case of a damaged
Dazebox Home, to avoid risk of electrocution, it is mandatory to report the presence of the damaged device so that it is not
used by others and to immediately call a qualified operator to repair the product or potentially prepare its decommissioning.
For a long product life, we recommend caring for it as follows.
• When the device is not in operation, neatly wrap the cable around Dazebox Home.
• Use a damp cloth to clean the exterior of Dazebox Home, only after it has been disconnected from the power supply. Avoid
abrasive sponges, solvents or water sprays.
• The differential devices in the electrical cabinet must be checked periodically according to the manufacturer's instructions.
It is advisable to press the Test button of the device monthly and check that it intervenes. In case of non-intervention, con-
tact a technician as soon as possible as the safety of the system is no longer guaranteed.
Warranty
The regular operation of the Dazebox Home (as long as it is used under the intended conditions of use) is guaranteed for the
period regularly stipulated in the sales contract. This guarantee consists of the restoration of efficiency, by means of repla-
cement or repair free of charge, of parts that are unusable or inefficient due to a factory defect and/or assembly error. This
guarantee lapses if the defect is connected with: - Carelessness - Accidents - Late notification of the defect - Improper use
- Unauthorised modification - Repair with non-original spare parts - Damage or malfunction caused by exposure to unusual
environmental conditions or the user's own power supply - Incorrect installation by non-certified installers.
Disposal
The packaging material should be disposed of in paper, cardboard, and plastic containers. The components of Dazebox
Home must be separated and disposed of separately. Further information on current disposal facilities can be requested
from local authorities.
16 - CE Compliance declaration
Product type: Electric vehicle charging device/s
Model: Dazebox Home, codes: DT01**32M5, DT01**32M7, DT01**32T5, DT01**32T7, DS01**32M, DS01**32T.
The manufacturer: DazeTechnology S.r.l. declares that the aforementioned products, if properly installed, maintained, and used
in accordance with their purpose, in compliance with the regulations and laws of the countries where they are installed and
the manufacturer's instructions, comply with the essential requirements of the European Directives, the harmonized Europe-
an standards, and the following international standards: Low Voltage Directive (LVD) 2014/35/EU (DIRECTIVE 2014/35/EU OF
THE EUROPEAN PARLIAMENT AND COUNCIL) EN 61851-1:2019 "Electric vehicle conductive charging system - Part 1: General
requirements" Electromagnetic Compatibility Directive (EMC) 2014/30/EU (DIRECTIVE 2014/30/EU OF THE EUROPEAN PAR-
LIAMENT AND COUNCIL) IEC 61851-21-2:2018 "Electric vehicle conductive charging system - Part 21-2: Electric vehicle requi-
rements for conductive connection to an AC/ DC supply - EMC requirements for off board electric vehicle charging systems".
Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment and
amendment of Annex II of Delegated Directive 2015/863/EU.The CE marking on products and/or packaging means that Daze-
Technology S.r.l. has made available the relevant technical documentation to the authorities of the European Union.
Legal Representative:
Andrea Daminelli
23.