Assembly & Installation - Pro-Point 8886434 Mode D'emploi

V1.0
3. Do not use your hands to detect a fluid leak. Use a large piece of
wood, cardboard or paper and watch for discolouration.
4. Replace damaged parts with identical manufacturer's components
to ensure it is rated to handle the pressure.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the contents are included.
Contents: • Pistol-Grip Grease Gun • Flexible Pipe • 4-Jaw Coupler
IDENTIFICATION KEY
A Flexible Hose
B Head Unit
C Coupler
D End Cap
E Bulk Loader/Air Release Valve
F Pressure/Volume Lever
G Handle
H Grip
I Barrel
J Plunger Rod Handle
ASSEMBLY & INSTALLATION
CARTRIDGE LOADING
1. Unscrew the grease gun head (B) from the barrel counter-clockwise.
2. Pull back the plunger rod handle (J) all the way.
3. Remove the plastic cap from the open end of the grease cartridge
and fully insert it into the empty barrel (I). Make sure the rim of the
cartridge is seated on the rim of the barrel.
4. Remove the metal pull tab seal from the grease cartridge.
Visit www.princessauto.com for more information
Pistol-Grip Grease Gun 8886434
Fig. 1
5