Transmitter Handling - Carson Reflex Wheel Pro 3 Lcd Manuel D'instructions

TRANSMITTER HANDLING

A. THROTTLE TRIGGER
Forward/
Speed up
Neutral
C. TRIM/SERVO REVERSE
ST trim
steering
TH trim gas
REV-button
GB // 30
Brake/
Speed down
Left
ST-
Dualrate
TH-
Dualrate
B. STEERING WHEEL
Neutral
Throttle Trim:
Trim the throttle servo slightly when the trigger is at the neutral
position.
Steering Trim:
If the front wheels do not align straight, use the steering trim to
adjust.
ST dual rate / TH dual rate:
Dual rate proportionally increases or decreases the servo travel
relative to the travel of the steering wheel / accelerator lever over
the complete servo travel.
Turn the potentiometers D/R ST or D/R TH to change the dual rate
setting of the steering or throttle.
REV switch / servo reverse:
Use the REV switches (TH REV + ST REV) to reverse the direction of
rotation of the servos.
1. Push the trigger
forward to slow down
or brake.
2. Pull the trigger back-
ward to accelerate.
Right