Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Blade safety rail (Fig. 4)
The cutting blade set back from the blade housing
reduces the risk of injuries due to unintentional body
contact. As soon as the hedge trimmer is switched off,
the sharp cutting blades will stop - due to safety reasons
- exactly under the cover rail in order to reduce the risk of
injuries during transport.
Impact protector (Fig. 9)
The extended guide rail prevents unpleasant shocks
(blade recoil) being transmitted to the operator due to
impact with solid objects (wall, ground etc.).
Gear protection feature
If solid objecst are caught in the cutting blade and jam
the motor, switch off the machine at once, disconnect
the power plug from the power socket, remove the
object and continue with the work.
The equipment is also fitted with an overload cutout,
which protects the gears against mechanical damage
in the event of blade jams.
11. Storing the trimmer after use
The hedge shears must be stored such that there is
no danger of injuries being caused to persons by the
cutting blades!
Important note: The shearing blades should be cleaned
after each use.(see also Section 8. Maintenance).This
will considerably increase the service life of the device.
Please use a lubricator that is not harmful to the environ-
ment , e. g. our service spray. Then put the shears in their
case with the cutting blades first.
12.Repair service
Repairs to electric power tools should only be carried
out by specialist electrical personnnel.
GB-4
Publicité
