Whirlpool W11339488B Guide D'utilisation page 14

Soil Level Option
The recommended soil level is preset for each cycle. The Soil
Level option allows you to select a Light, Normal, or Heavy soil
level setting. Some preset soil levels can be changed. For heavily
soiled and sturdy fabrics, select the Heavy soil level setting.
For lightly soiled and delicate fabrics, select the Light soil level
setting. Lower soil level settings will help reduce tangling and
wrinkling.
10.
Select options, if desired
From the home screen, touch the Options icon (at upper right
of screen) and the Options screen will show Soil Level, Extra
Rinse, Pre-Soak, FanFresh
selections. Previously selected "What to Wash" and "How to
Wash" options will be shown on the screen. Touch the screen for
each option to change its setting.
Extra Rinse Option
The Extra Rinse option provides an additional rinse to the
selected cycle.
Pre-Soak Option
The Pre-Soak option can be set for 30 min, 1 hr or 8 hrs.
FanFresh Option
®
The FanFresh option will periodically tumble the load after the
®
end of the cycle for up to 12 hours. Touch FAN FRESH to activate
this option. FanFresh may be ended at any time by touching
®
the "X" on the touch screen to the right of the estimated time
remaining.
Steam Clean Option
The Steam Clean option adds additional soak and wash time
to many cycles to help remove tough stains, as well as a steam
boost for added cleaning power. An integrated heater helps to
maintain optimal wash temperatures. See the "Cycle Guide" for
cycles that allow the Steam Clean option.
† Not all options and settings are available with all programs/cycles.
See "Cycle Guide" for available options and settings.
14
†
, Steam Clean, and Wrinkle Shield
®
11.
Use Tools button to change
other settings, if desired
The Tools button gives access to many other settings, utility
cycles, preferences, and information. Touch the TOOLS button
to access the Tools screen, which contains the following
(you will need to scroll down with your finger to access
all of the selections):
Load & Go Dispenser 1
™
Touch this icon to access:
Load & Go Status Dispenser 1 and choose between:
™
Active
n
Disabled (1 Cycle)
n
Off (Permanently)
n
™
Detergent Concentration Dispenser 1 and choose between:
2X
n
3X
n
4X
n
5X
n
6X
n
8X
n
Load & Go Dispenser 2
™
Touch this icon to access:
Load & Go Status Dispenser 2 and choose between:
™
Active
n
Disabled (1 Cycle)
n
Off (Permanently)
n
Load & Go Content Dispenser 2 and choose between:
™
Softener
n
Detergent
n
Once set at Detergent:
Set Concentration Dispenser 2 and choose between:
2X
n
4X
n
6X
n
8X
n
Control Lock
Touch this icon to lock the controls.
Swipe up to unlock.
Mute
Touch this icon to mute or unmute sounds.
Utility Cycles
Touch this icon to access the following utility cycles: Drain &
Spin and the Clean Washer with affresh
cycle you wish to use and follow the screen prompts.
NOTE: To get a Rinse & Spin cycle, select Drain & Spin and
the Extra Rinse option.
Preferences
Touch to access Times and Dates, Sound Volume, Display
Settings, and Regional. Follow the screen prompts.
WiFi
Touch to access Connect to Network, SAID (Smart Appliance
ID) Codes, Mac Address, and WiFi. Follow the screen
prompts.
cycle. Touch the utility
®