Program Description - DEA SYSTEM SSE12 Notice D'emploi Et Avertissements

DIP1 DIP2
ON OFF Bistable with separated ON/OFF:
The impulsive activation of IN1 involves relay=ON
The impulsive activation of IN2 involves relay=OFF
Bistable ON/OFF separated without
delays:
ON
OFF
ON
OFF
ON
OFF
N.B. : When an input is active, inciden-
tal impulses on the other input, are not
considered.
Bistable ON/OFF separated with delay
at turning off (delay_off):
ON
OFF
ON
OFF
ON
OFF
N.B.:
- When an input is active, incidental
impulses on the other input, are not
considered.
- Incidental inputs on both the inputs du-
ring "delay_off", are not considered.
DIP1 DIP2
ON ON Programming:
learning of temporizing/remotes memorizing
8.2 Operating times learning
Following the herewith described procedure it's possible to program a delay (variable from 1 sec to 5 min)
of effective turning on or turning off of the relay as regard to its own command.
WARNING: the programming of a delay at turning on ("delay_on") involves the automatic deactivation of
delay at turning off (delay_off) and vice versa.
Operating instructions and warnings

PROGRAM DESCRIPTION

RELAY MODE ACCORDING TO INPUTS MODE
IN1
IN2
RELE'
DELAY_OFF DELAY_OFF DELAY_OFF
PROGRAM DESCRIPTION
only for qualified personnel
Bistable ON/OFF separated with delay
at turning on (delay_on):
DELAY_ON
DELAY_ON
ON
OFF
ON
OFF
ON
OFF
N.B.:
- When an input is active, incidental
impulses on the other input, are not
considered.
- Incidental inputs on both the inputs du-
ring "delay_on", are not considered.
IN1
IN2
RELE'
DELAY_ON
IN1
IN2
RELE'
11