Uline H-9410 Mode D'emploi

H-9410
GLO BRITE RUNNING
®
MAN SIGN – DOUBLE SIDED
TOOLS NEEDED
Phillips Screwdriver
Sign x 1
• The sign should be charged with an external
illumination source for a minimum of 60 minutes to
obtain full operational conditions.
• The sign should be mounted in a manner that
ensures rigidity and mechanical sufficiency.
• External illumination source must be reliable and
supplied by a circuit, not controlled by automatic
timers or sensors, and must have controls that are
accessible only to authorized personnel.
• External illumination source is to be energized at all
times during building occupancy.
• Lighting levels on the sign faces should be
confirmed after any change in external lighting
types or levels.
Sign is designed to operate automatically. Charging
light source must illuminate faces of sign in accordance
with at least 21.6 lux of LED, fluorescent, metal halide
or mercury vapor light at all times during building
occupancy to ensure that the sign will remain legible for
at least 30 minutes.
PAGE 1 OF 9
1-800-295-5510
uline.com
Drill Level
PARTS
Mounting Bracket x 1
SAFETY
OPERATION
Assembly Anchor x 4
(mounting hardware)
Screw x 3
• It is recommended that periodic visibility tests be
performed in accordance with all applicable codes.
• Install this sign indoors only, where not exposed to
direct sunlight, liquid spray or temperatures outside
the range of 50°-104°F.
• Cleaning the sign faces with a damp cloth is
recommended during monthly inspections.
• When a retrofit involves the replacement of existing
electric exit signs, the electric junction box must be
sealed with an approved blank cover plate before
installing.
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
Screw x 4
(mounting hardware)
0125 IH-9410