Uline H-9440 Mode D'emploi

H-9440, H-9441
PORTABLE STAGE
ADJUSTING HEIGHT
1. Place the stage upside down on the floor. Unfold
legs by pulling each leg assembly out until folding
mechanism locks. An audible "click" should be
heard when the mechanism is locked. (See Figure 1)
Figure 1
2. To adjust platform height, pull out steel pin
completely from leg and loosen black knob
counterclockwise one turn. (See Figure 2)
Figure 2 Black Knob
PAGE 1 OF 6
1-800-295-5510
uline.com
ASSEMBLY
3. Slide silver leg tube in or out to desired height. Align
silver leg tube hole with hole in outer black tube.
(See Figure 3)
4. Insert steel pin
back through
aligned holes.
Tighten black
knob fully to
secure in place.
(See Figure 4)
5. Repeat process for remaining three legs.
6. Place the stage onto its feet. (See Figure 5)
NOTE: Ensure all feet are set at the same height
and sit firmly on level ground. Ensure all knobs
are tightened fully.
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
0724 IH-9440
Figure 3
Figure 4
Figure 5