Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Problem
Solution
Fan will not start.
1.
Check circuit fuses or breakers.
2.
Ensure that the batteries in the transmitter are installed properly with the +side facing up, and that they still have power
NOTE:When a button is pressed on the transmitter, the backlight in the transmitter will light up if the bat-
teries still have power.
Fan sounds noisy.
3.
Check all electrical connections to ensure proper contact.
CAUTION: Make sure the main power is OFF when checking any electrical connection.
1.
Make sure all motor housing screws are snug.
2.
Make sure the screws that attach the fan blade brackets to the motor are tight.
3.
Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing.
CAUTION: Make sure main power is off.
4.
Allow a 24-hour "breaking-in period. Most noise associated with a new fan disappears during this time.
5.
If using an optional light kit, make sure the screws securing the glassware are tight. Make sure the light bulbs are not
touching any other component.
6.
Do not connect this fan to wall mounted variable speed control(s). They are not compatible with ceiling fan motors or
Fan wobbles.
remote controls.
7.
Make sure the upper canopy is a short distance from the ceiling. It should not touch the ceiling.
1.
Check that all blade and blade arm screws are secure.
2.
Most fan wobbling problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling
above the tip of one of the blades. Measure this distance. Rotate the fan until the next blade is positioned for measurement.
Repeat for each blade. The distance deviation should be equal within 1/8".
Remote control
3.
If the blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and
malfunction.
possibly result in smoother operation.
1.
Ceiling fans with remote control systems
basic On/Off wall switch, if desired.
26
| KICHLER.COM
CAN NOT
be operated in conjunction with any other control system EXCEPT a
Publicité
