Chefman BOILS FAST RJ11-18-TI-WMC Mode D'emploi page 9

OPERATING INSTRUCTIONS
BEFORE FIRST USE
To rinse the pot of any packing debris, "brew" a pot of plain water
without tea. To do so, follow the directions below.
1.
2.
3.
4.
5.
6.
7.
RJ11-18-TI-WMC_UG_LIVE_012825.indd 9 RJ11-18-TI-WMC_UG_LIVE_012825.indd 9
Remove all packing materials. Be sure that all parts are included
before discarding any packaging.
Pull out the power cord from the compartment under the base, and
place base on a flat surface. (Make sure the power cord comes out
of the opening in the base so the unit can sit level.)
To rinse the pot of any manufacturing residue, "brew" a pot of plain
water without tea. To do so, lift off the lid and fill the kettle with
water to the MAX line.
Put the lid with the infuser attached (but empty) back in the kettle.
Place the kettle on the base unit, and plug into a power outlet.
Switch the kettle on by pressing the power switch. The blue LED
lights inside the kettle will illuminate to indicate the water is heating.
Once the kettle boils, the blue indicator lights will turn off, and the
kettle will automatically switch off.
Empty the kettle (discard the water), then rinse it with fresh water.
9
1/28/25 5:24 PM 1/28/25 5:24 PM