Uline H-4167 Mode D'emploi

π
H-4167, H-4168
SIDE PANEL
PLATFORM TRUCK
TOOL NEEDED
1/2" Socket Wrench
Deck Assembly x 1
1. Place deck assembly on its side on a smooth,
non-marring surface. (See Figure 1)
Figure 1
2. Remove bolts from caster holes in bottom of deck
assembly. (See Figure 2)
Figure 2
PAGE 1 OF 3
1-800-295-5510
uline.com
PARTS
Bolt x 16
ASSEMBLY
3. Align casters with caster holes and secure with bolts
removed in step two. (See Figure 3)
Figure 3
NOTE: Swivel casters should both be installed
on the same end of the deck assembly.
Pour le français, consulter la page 3.
Swivel Caster x 2
Para Español, vea página 2.
Rigid Caster x 2
0423 IH-4167