Uline H-4814 Instructions De Montage

TWO-SHELF WIDE
SPAN STORAGE RACKS
TOOL NEEDED
Rubber Mallet
A B
Upright Post x 4 Side Support x 4
NOTE: Lean posts against a wall or assemble
with another person.
1. Connect two upright posts (A) by inserting the side
support pieces (B) into the posts. (See Figure 1)
NOTE: Side supports should be positioned with
ledge on top.
Figure 1
B
B
2. Repeat step one for the other two upright posts (A).
PAGE 1 OF 6
1-800-295-5510
uline.com
Front/Back Support x 4
A
Two Person Assembly
Recommended
PARTS
C
ASSEMBLY
3. Connect the two upright post assemblies by
inserting front/back supports (C) to each upright
post, at the same level as the side supports.
(See Figure 2)
NOTE: Be sure the supports are fully seated
before continuing with assembly.
NOTE: Front/back supports should be
positioned with ledge on top.
Figure 2
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
D E
Shelf Support x 2
C
Board x 2
C
0325 IH-4270