Component Identification - EXPERT GRILL 720-0968F Guide Du Propriétaire

Match Light
1. If the burner will not light after several attempts
then the burner can be match lit, before using the
match allow 5 minutes for any accumulated gas to
dissipate.
2. Clip a match on one end of the lighting rod.
3. Light match.
4. Hold lighting rod and insert lighted match right
next to the burner ports.
5. Push and turn the designated control knob to
HIGH.
6. Burner should ignite immediately.
Note: Remove all packaging, including straps, before using the grill
1. Push
2. Turn knob to
3. Adjust flame
Main Burners
HIGH
10
Main burner

Component Identification

OFF /
ARRÉT
HIGH /
HIGH
ÉLEVÉ
Push In
③
Control Knob
Side burner
Side Burner
OFF
LOW /
LOW
BAS