Telecom Behnke myintercom Manuel page 84

Additional modules for myintercom Plus
▸
Model version of the myintercom Plus video
door intercom with a card reader (only one
call button possible)
▸
Model version of the myintercom Plus video
door intercom with a two-core receiver
▸
Optional safety relay
Additional modules for the myintercom One
▸
Optional safety relay
▸
A myintercom One door intercom may also be
equipped with one of the following additional
modules:
•
myintercom One with access control
RFID reader
•
myintercom One with access control
fingerprint sensor
•
myintercom One with access control
code lock
Connection
▸
Power supply via PoE according to IEEE 802.
af-2003 or via two-core technology
▸
Power consumption: ca. 5.8 W
www.behnke-online.de
Instructions myintercom Plus IP video door intercom
Technical Specifications
Important! Please note that the power con-
sumption stated only covers the consumptions
for the door station plus additional modules
(only for myintercom Plus). For myintercom One
door intercom stations with additional modules,
the additional module will have its own evalua-
tion unit and power supply. When using a power
supply unit/PoE injector, please ensure, that its
maximum power out is not inferior to the power
consumption for the door intercom station plus
the open door function in use, should the latter
be directly supplied from the door intercom
station.
GB
84