Publicité
Les langues disponibles
Les langues disponibles
Always properly ground the probe with
the lead before contacting high voltage
circuits with the probe tip. Always
disconnect the probe tip from high voltage
circuits before disconnecting the ground
lead. Do not connect the probe ground lead
to any point which is at a potential other
than earth ground.
Use only on test instruments where the
chassis or return lead is properly
grounded.
Use only in office-type indoor setting
The instrument is designed to be used in
office-type indoor environments. Do not
operate the instrument:
•
•
•
•
Use in an indoor Pollution Degree 2
environment. Measurements made by this
instrument may be outside specifications if
the instrument is used in non-office-type
environments. Such environments may
include rapid temperature or humidity
187
In the presence of noxious, corrosive,
or flammable fumes, gases, vapors,
chemicals, or finely-divided
particulates.
In environments where there is a
danger of any liquid being spilled on
the instrument.
In air temperatures exceeding the
specified operating temperatures.
In atmospheric pressures outside the
specified altitude limits or where the
surrounding gas is not air.
www.
.com
4
information
Publicité
