Publicité
Les langues disponibles
Les langues disponibles
Safety Summary
WARNING CAUTION
To avoid personal injury and/or product
damage, review and comply with the
following safety precautions. These
precautions apply to both operating and
maintenance personnel and must be
followed during all phases of operation,
service, and repair of this instrument.
Only qualified personnel should use this
probe. This high voltage probe is designed
to be used by personnel who are trained,
experienced, or otherwise qualified to
recognize hazardous situations and who
are trained in the safety precautions
necessary to avoid possible injury when
using such a device.
This instrument is intended for usage
within Measurement Category I (CAT I)
only.
Do not exceed 60 seconds of contact
between the probe and circuit-under-test
when measuring voltages ≥30kV (DC +
AC
) or 20kV (AC
). It is recommended
pk
rms
to wait an interval of 5 minutes between
such measurements.
Do not work alone when working with high
voltages.
2
187
information
www.
.com
Publicité
