Evolur CRUISE RIDER Manuel Du Propriétaire page 7

RIDER ASSEMBLY (cont.)
1
4. To open up the seat, release the rotary
button and simultaneously adjust the button
to pull up the seat back (Figure A).
5. Support into the top of the seat back until it
clicks into place (Figure B). To remove the
Head Support, press the release button and
release it (Figure C).
6. Guard Rail:
• Put the Guard Rail Housing into the Seat
until it clicks into place ( Figure D). Attach
the Guard Rail to the Seat Back (Figure E).
• To detach the Guard Rail, push the release
button under Guard Rail Housing and pull
out Guard Rail from Seat (Figure G).
• Pull the release buttons on the side of the
Seat Back to remove the Guard Rail (Figure
H).
www.evolurbaby.com/help
The rotary button
The adjust
button
E
G
F
Release
Button
H
7