Evolur CRUISE RIDER Manuel Du Propriétaire page 15

USING THE STROLLER CONNECTOR (SOLD SEPARATELY)
The connector can be used for most
compact baby strollers.
1. Press the quick release button on the
connector to connect it to the rider as
shown in figure A/B/C. To detach the
connector, press the quick release
button to remove it.
2. To attach the connector to rear leg of
your baby stroller, use the strap located
on the other end of the connector. Make
sure that the strap is tight enough to
velcro it as shown in figures D/E/F.
ATTENTION:
• When using the connector on the left
rear leg of your baby stroller, connect it
to the right front leg of your Coast
Rider, and vice versa. Refer to Figures
G/H.
www.evolurbaby.com/help
A
C
E
G
B
D
F
H
15