Care And Maintenance - Evolur Cruise Rider Manuel Du Propriétaire

CARE AND MAINTENANCE

ROOM CLIMATE CONTROL:
• TO PROLONG THE LIFE OF YOUR STROLLER KEEP IT CLEAN AND DO NOT LEAVE
IT IN THE DIRECT SUNLIGHT OR IN THE CAR BOOT FOR EXTENDED PERIODS OF
TIME.
• REMOVABLE FABRIC COVERS AND TRIMS MAY BE CLEANED USING WARM
WATER WITH A HOUSEHOLD SOAP OR MILD DETERGENT. ALLOW IT TO DRY
FULLY, PREFERABLY AWAY FROM THE DIRECT SUNLIGHT.
• NON REMOVABLE FABRIC COVERS AND TRIMS MAY BE SPOT CLEANED USING
A DAMP SPONGE WITH SOAP OR A MILD DETERGENT. ALLOW IT TO DRY
COMPLETELY BEFORE FOLDING OR STORING IT AWAY.
• IN SOME CLIMATES THE COVERS AND TRIMS MAY BE AFFECTED BY MOLD AND
MILDEW. TO HELP PREVENT THIS OCCURRING, DO NOT FOLD OR STORE THE
PRODUCT IF IT IS DAMP OR WET. ALWAYS STORE THE PRODUCT IN A WELL
VENTILATED AREA.
• WHEN USING YOUR STROLLER AT THE BEACH - COMPLETELY CLEAN YOUR
STROLLER AFTERWARDS TO REMOVE THE SAND AND SALT FROM THE
MECHANISMS AND WHEEL ASSEMBLY. SAND AND SALT WILL CAUSE
PREMATURE WEAR AND CORROSION.
• IF THERE ARE COMPRESSION MARKS ON THE WHEELS - USE A DOMESTIC HAIR
DRYER TO GENTLY WARM (DO NOT OVERHEAT) THE WHEELS AND THE
COMPRESSION MARKS SHOULD SLOWLY DISAPPEAR.
• ALWAYS CHECK PARTS REGULARLY FOR TIGHTNESS OF SCREWS, NUTS, AND
OTHER FASTENERS. TIGHTEN IF REQUIRED. TO MAINTAIN THE SAFETY OF YOUR
NURSERY PRODUCT, SEEK PROMPT REPAIRS FOR BENT, TORN, WORN OR
BROKEN PARTS.
16
www.evolurbaby.com/help