Hkoenig toad 6 Manuel D'instructions page 11

Electric Diagram
Energy Saving Tips
·
The refrigerator should be located in the coolest area of the
·
room, away from heat producing appliances, and out of the direct
sunlight.
Overloading the refrigerator forces the thermoelectric cooling
·
system to run longer.
Reduce door openings and extended searches, remove as
·
many item as needed at one time, and close the door as soon as
possible.
One characteristic of heat-pipe units is the length of time it
·
requires to recover from having the door opened and shut frequently.
It may be necessary to wait longer for the temperature to return to its
former level once the door has been opened for too long. This is
normal for the type of unit.
Heat-pipe technology costs just pennies to operate. It is
·
environmentally friendly due to the lack of CFC's.
PRODUCT FUNCTION DESCRIPTION
1.
It is intended to be used exclusively for the cellar.
2.
This refrigerating appliance is not suitable for the freezing
foodstuffs.
3.
The cellar is recommended to be designed at 12℃.
4.
The shelves placed in factory mode is the most efficient use
of energy for the refrigerating appliances.
5.
The following combination of shelves is recommended for