Samsung RF23BB8 Serie Manuel D'utilisation page 27

Detach the FlexZone drawer
Untitled-7 27
1. Lift up to remove the FlexZone basket.
2. Remove the hex-head bolt on each side
of the drawer using a 10 mm socket
wrench.
3. Lift up to remove the drawer front of
the FlexZone from the rail assembly.
CAUTION
• Use caution when removing the rail
assembly, which may fall off causing
damage to the floor.
• Make sure to put the FlexZone drawer
in place after removing or mounting the
FlexZone basket. The FlexZone drawer
may not open or close if the freezer
drawer is not in place.
• Do not store too much food in the
FlexZone drawer. This prevents the
FlexZone drawer from closing properly,
resulting in frost buildup.
English 27
2022-01-20 11:44:59