Preliminary Checks; Electrical Installation; Safety Instructions; Regulations - Somfy Cb 230 Rts Manuel D'installation

CB 230 RTS
is prohibited.
change to the standards or to the motorisation.

1.3 Preliminary checks

> Installation environment
ATTENTION
Do not spray water onto the motorisation.
Do not install the motorisation in an explosive environment.
Check that the temperature range marked on the drive is
suited to the installation location.
> Condition of the gate to be motorised

1.4 Electrical installation

motorisation and equipped with protection, comprising:
-
-
> Cable feed
Underground cables must be equipped with a protective
and the accessories cables.
For overground cables, use a cable grommet that will
1.5 Safety instructions relating to installation
additional element not recommended in this manual is strictly
prohibited.
Copyright © 2017 SOMFY ACTIVITES SA. All rights reserved.
WARNING
DANGER
DANGER
WARNING
until installation is complete.
Do not use adhesive to secure the motorisation.
ATTENTION
must be installed.
- the mechanism is correctly adjusted
- the manual back release device is operating correctly
- the motorisation changes direction when the gate
> Safety devices
For operation in automatic mode or remote control,
photoelectric cells must be installed.
In automatic mode, the drive operates in at least one
direction with no intentional activation by the user.
public road, an orange light type signalling device may be
required to comply with the regulations in the country in
which the motorisation is installed.
> Clothing precautions
installation.
For manoeuvring, drilling and welding operations, wear

1.6 Regulations

instructions, when used in accordance with these
applicable European Directives and, in particular, with the
Machinery Directive 2006/42/EC and the Radio Equipment
Directive 2017/53/EU.

1.7 Assistance

installing your motorisation.
Do not hesitate to contact us; our specialists are on hand to
DANGER
WARNING
2