MODENO OCK50-NG01 Mode D'emploi page 7

NATURAL GAS CONVERSION INSTRUCTION
7
8
Gas inlet
(connect to regulator)
ONLY turn the brass joint counterclockwise on the bellows when disconnecting it from valve.
DO NOT rotate the stainless steel tube. Excessive rotation of the stainless steel tube will cause the gas pipe to
twist or break,causing gas leaks.
Turn the hex nut counterclockwise to disconnect the LP valve from the control
panel.
Disconnect the bellows from the LP valve.
For ONE piece Bellows models, please see A.
For TWO pieces Bellows models, please see A&B.
Disconnect the thermocouple from the LP valve.(see C)
LP Valve
B
Bellows
Disconnect
!
Brass joint
A
Disconnect
Disconnect
C
Thermocouple
WARNING
SS tube
Brass joint
7 / 40
Bellows
Gas outlet
(connect to burner)