Pioneer SOUND TECTOR TQ-RG3000 Mode D'emploi page 3

CAUTION
Product operating environment
The operating temperature range of this product shall be 5ºC to 35ºC,
and the operating humidity shall be 80% or less (however, there shall
be no condensation). Do not place the product in a location with poor
ventilation, where the humidity is too high, or where it is exposed to direct
sunlight (or strong artificial light).
• When removing the connecting cables, do not pull the cable part. The
cable could become damaged and cause a fire or electric shock.
• Do not place the product in a place where it will be exposed to direct
sunlight, where it is dusty or there is high humidity, where there is oil
smoke or steam, or where the temperature is abnormally high. The
performance of the product could drop, or this could cause a fire or
electric shock.
• When connecting to other devices, thoroughly read the operating
instructions for these devices, turn off the power supply, and perform the
connections as explained. Also, use the specified cables for connections.
Failure to do so could cause a functional or operational defect, resulting
in malfunction.
• Do not place heavy objects or protruding large objects onto the product. This
could cause toppling and falling due to loss of balance, resulting in an injury.
• Do not place the product in a place with an abnormally high temperature,
such as in an automobile with closed windows, or in a place exposed to
direct sunlight. Failure to do so could cause a fire.
• Do not use the product for a long period of time when the sound is
distorted. This could cause heating of the product, resulting in a fire.
• Use the product after setting the volume to the minimum. Sudden high
volume could damage your hearing.
• Be careful not to raise the volume too high. Continuous use for a long
period of time with a high volume could affect your hearing.
• Ensure that the connection terminal is not blocked, and that foreign
objects and dirt do not enter the connection terminal. This could cause a
functional or operational malfunction.
• Do not use the product if it is damaged or deformed, and do not touch the
damaged or deformed parts, or attempt to fix it yourself. This may cause
injury or malfunction.
• Do not drop the product. This could cause parts to break or come off,
resulting in injury.
• Do not spill drinking water, etc., on the product. This could cause a
malfunction.
• Do not sleep while wearing the product. Continuous use for a long period
of time with a high volume could affect your hearing.
• Do not excessively bend or force open the neckband. This could cause a
malfunction.
Others
Cleaning the product
• Wipe the product with a soft cloth for regular cleaning.
• If the product is very dirty, immerse a soft cloth in a neutral cleaning agent
diluted with water 5 to 6 times the volume of cleaning agent, wring the cloth
well, wipe off the dirt, and then wipe it again with a dry cloth. Note that if
alcohol, thinner, benzene, insecticide, etc., adheres to the product, it will
cause peeling of the print and paint. Also, if a chemical cloth or similar is
used, thoroughly read the cautions provided with the chemical cloth.
Sound etiquette
Enjoying music can be an issue for others, depending on the time and
place. Therefore, show sufficient consideration for your neighbors. You can
raise or lower the volume of the stereo as you wish. In particular, at night
when it is quiet, even small sounds can be heard. Take particular care when
listening to music at night. Closing windows or wearing headphones so that
the sound is not heard by your neighbors are methods for achieving this.
Let us have consideration for each other, and maintain a pleasant living
environment.
3