Source Of Danger; Qualified Operators; Personal Safety Equipment; Safety Measures In The Work Place - Ravaglioli Master Gear 1,0 Mode D'emploi

127640 02/2019
Operating Instruction
Safety

1.6 Source of Danger

Mechanic Where? Scissors arms / un-
derframe
What? Crush and shear
points
Danger! Loss of limbs /life
Hydraulic Where? Hydraulic compo-
nents e.g. hoses
What? Because of dama
ge oil could be
sprayed out under
high pres-sure
Danger! Burns and conta
mi-nation to the
eyes
Foot Pump Where? Operating pedals,
Lifting / Lowering
What? Slipping off pedal
Danger! Injury to the leg
Current Where? Current carrying
What? Touch
Danger! Life threatening
Work on the electrical and hydraulic
components should only be carried
out by a competent tradesman!
Danger
Never
• remove
• alter
• take out of service the safety facilities
• Always secure that the machine is out of
service when
• Setting up
• The alteration of the employment re-quire-
ments
• The alteration of the operating proce-dure
• Maintenance
• Servicing
• Repair

1.7 Qualified Operators

The operator must
• be over 18 years old
• be instructed in the operation of the ma-
chine
• have proved to the firm that he is capa-ble
of operating the machine
• have read and understood the operating
instructions
• must observe the operating instructions

1.8 Personal Safety Equipment

For the operating of the machine:
• Safety shoes
For cleaning / maintenance / repair:
components
• Safety shoes
• Work gloves
• Face protection

1.9 Safety Measures in the Work Place

Secure positioning of the machine
Avoid crush and shear zones between the
machine and it's surroundings
Ensure that the workplace remains clean
and clear of obstacles

1.10 Conduct In An Emergency

Footpump
Release the pump/
lower pedal imme-
diately
Secure against further
By raised load support the load carrying
component
E - Hydraulic
Release the raise /
lowerpush-button im
mediately
Switch of at the
mains / remove the
plug
51