Table des Matières
Publicité
Fig. 16:
Électrode de
charge
EXR130US
BA-fr-3020-2108_R130A / R131A / R130A3L / EXR130
A.2 Installation NEC
Type "B" (back side)
1/2" - 14 NPT
40
Type "W" (back side with angle)
40
AL = active length
GL = total length
Delivery condition: reducing socket and protective hose connected to the thread 1/2" - 14 NPT of the bar (all types).
Protective hose connection dependent on the electrode bracket and the US or Canadian regulations by installations!
The installation must be in accordance with the National Electrical Code ANSI/NFPA 70, Article 504 and ANSI/ISA RP12.6.
In Canada, the installation must be in accordance with Canadian Electrical Code, CEC Part 1.
Attention: Observe separate mounting instructions!
40
Sliding nuts
4
Item no. 100876
30
1m GL and below = 2 off
2m GL and below = 3 off
thread M5 (3x)
3m GL and below = 4 off
4m GL and below = 5 off
Charging electrode for use GNH61 only!
GL
AL (n x 50 - 5)
50
5
pins
GL
AL (n x 20 - 5)
50
5
angle connection rotatable 0 - 360°
pins
reducing socket 1/2" to G 1/4"
outside thread G 1/4"
protective hose ∅13
plug for generator
electrode cable ∅5.2
Plastic bolts
6.5
e.g. Item no. KSR 00015
Max. bolt depth 6.5 mm
Torque 0.4 Nm; Secure
bolts against working
loose (e.g. Loctite 243)
33
35
35
Publicité
Table des Matières
