Declaration Of Conformity - Nidec-Shimpo SMS-200E Notice D'utilisation

Declaration of Conformity

Manufacturer:
Nidec-Shimpo Corp.
Nagaokakyo City, Japan
on behalf of
Alluris GmbH & Co. KG
DE 79100 Freiburg, Germany
Product:
Digital Stroboscope
Model Nos.:
SMS-300E, (DT-311N), SMS-300B (DT-315N)
We hereby confirm that the product complies with the requirements of the EMC Directive 92/336/EEC and
conforms the following specification:
EMC Directive 92/336/EWG
EN 55022 (RF Emission)
EN 55022 (CV Emission)
EN 61000-4-2 (ESD)
EN 61000-4-3 (RF Field)
EN 61000-4-4 (Burst)
EN 61000-4-5 (Surge)
EN 61000-4-6 (RF Field)
EN 61000-4-11 (Interrupt)
The compliance to the requirements of all relevant EEC directives is confirmed by the CE-marking of the product.
Calibration confirmation
We hereby confirm in accordance to DIN EN 10204, 2.1 that this instrument has been tested in accordance with
DIN EN 9001:1994 approved procedures. The instrument meets all specified technical data's and the accuracy
was tested better than stated in the technical data accordingly.
The equipment used for test and calibration are traceable to the international recommended and approved
standards of the National Research Laboratory of Metrology, Japan and the Institute of Standards, Prefecture
Kyoto.
Manufacturer:
Nidec-Shimpo Corp.
Nagaokakyo City, Japan
Model No.: ..............................................
Serial No.: ...............................................
Date of Purchase: ...................................
Class B
Class B
Criteria A
Criteria A
Criteria A
Criteria A
Criteria A
Criteria A
43