Functions - Domo DO320A Mode D'emploi

DO320A
Temperature button :
As soon as you turn on the airco a temperature will be displayed (this is mostly differ-
ent from the room temperature). Use the arrows on the temperature button to lower or
raise the temperature. The temperature can vary from 15°C up to 31°C.
For best use of your airco, first determine the temperature and afterwards select the
mode. This prevents unnecessary strain on different parts of the airco.
Timer button :
Press the timer button. Use the arrows on the timer button to program the aircondi-
tioner. When the appliance is on, you can program it to turn it off. When the appliance
is off, you can program it to turn on. (remember to put the on/off button in the on posi-
tion when you program the airco to turn on.) The maximum programmable time is 12
hours.
Oscillation knob:
For starting or stopping the oscillation in the left/right direction.

FUNCTIONS

Cooling function :
Make sure the drip tank is put well in place.
Make sure the exhaust hose is properly installed. When you want to cool you always
have to guide the hose through a window to the outside, to remove the hot air from the
room.
Press the mode button a few time until the cool function is activated. Press the tem-
perature button a few times to select the desired temperature.
Press the ventilation speed button to select the desired ventilation speed. There are
three speeds : slow, medium or fast.
To make the cooling optimal, take note of the following :
- When the room is in direct contact with the sun, close the curtains.
- Never place the appliance near a heating source.
Dehumidification function :
Keep doors and windows closed to enlarge the effect of dehumidification.
Make sure the drip tank is well in place.
Press the mode button a few times to select the dehumidification function. The speed
of dehumidification can not be changed.
When you only use the appliance to dehumidify you don't need to use the exhaust
hose.
Ventilation function :
Press the mode button a few times to start the ventilation function. On the display is
shown a fan symbol. Press the ventilation speed button to determine the ventilation
speed.
24