Bimar KPT-2000B 5208LE Notice D'instructions page 19

To start the appliance insert the plug in the power grip: press the button on the side in pos.I, this
should light up on the display
the " " button and select the right mode.
The appliance can be used in two different modes:
-Normal: power, temperature and time are regulated by the control panel and the remote control.
-Weekly program: power, temperature and time are regulated and preset for the 7 weekdays, they
are activated by the remote control.
If there is no preset for the temperature the appliance will work for 12 hours and then go into
stand-by.
Normal mode
The appliance has the following adjustment and control elements:
• Main switch(I/0) if it is in pos."I" the appliance is in stand-by, in pos. "0" the appliance is off.
• The button "
activates the other functions. It puts the appliance in stand-by. This symbol lights up on the
display "- -".
• Oscillation for alternative "front-low" air direction: function is active, by pressing the "
the remote control. To delete the oscillation press again the button swing of the remote control.
• The "
" button on the keyboard and on the "
button it defines power: "
ventilation. For "
"
(2000W): very hot air;
•
The button "
Is the timer when the appliance is on, every time you press
the button it extends the working time of the appliance by
one hour (max 12h), when the time runs out the appliance
switches to off automatically. On the display appears the
selected time next this simbol
active functions. To disable the timer press the button
repeatedly until " 00 " appears. The picture shows the
timer with "8 hours" selected.
The timer is also a start programmer when the appliance is
in stand-by: every time the button gets pressed the timer
adds one hour of stand-by, when the time runs out the
appliance starts automatically. The remaining time (in
hours) is written on the display until the time runs out and
the appliance starts to work.
•
The buttons
temperature is 23°C and it increases if you press the
(it means the appliance is in stand-by) to start the appliance press
" on the keyboard and on the remote control"
" (1200W): hot air;
" button it defines power: "- -" only ventilation; "
" "
+ (2000W)+
"on the keyboard and on the remote control;
, beside the one of the
.
and on the remote control: define the temperature (10-49°C); the default
" button of the remote control. For "
" "
+ (2000W): very hot air; "- -" only
Swing of front louvre; stand-by position.
button and decreases if you press the
19
": starts ventilation and
" (1200W): hot air;
" to
"
"
+