Changing The Display Settings - Sony MV-900SDS Mode D'emploi

Notes
• When the output level is set to "High" in step 2,
noise may be heard.
• If noise is heard due to the interference with the
local FM broadcast, change the FM transmission
frequency.
• When the FM modulator is turned off, you
cannot change the frequency setting.

Changing the display settings

You can adjust the display settings manually if
the display is hard to see from the position
where you are seated.
1
Press (MENU) repeatedly to select the
desired item.
2
Press (VOL) (+) or (VOL) (–) to adjust to
the desired setting.
When "Picture" is selected;
Picture
+
/–
Press
Press (VOL) (+) : to increase the contrast.
Press (VOL) (–) : to decrease the contrast.
When "Brightness" is selected;
Brightness
+
/–
Press
Press (VOL) (+) : to brighten the contrast.
Press (VOL) (–) : to darken the picture.
16
The setting value of the item
selected appears in this area.
32
or MENU.
32
or MENU.
When "Color" is selected;
Color
+
/–
Press or MENU.
Press (VOL) (+) : to increase color intensity.
Press (VOL) (–) : to decrease color intensity.
When "Hue"* 1 is selected;
Hue
+
/–
Press or MENU.
Press (VOL) (+) : to increase the saturation.
Press (VOL) (–) : to decrease the saturation.
1 "Hue" is adjustable only when the NTSC
*
color system is selected.
2 "CTR" appears only when
*
center of the bar.
When "Dimmer" is selected;
Press (VOL) (+) or (VOL) (–) to select "On."
The brightness of the screen will be
adjusted automatically.
Dimmer; On
+
/–
Press or MENU.
When "Video Adjust" is selected;
Press (VOL) (+) or (VOL) (–) to select
"Reset."
"Picture," "Brightness," "Color,"
"Hue," and "Dimmer" settings will be
reset to the factory preset level.
Video Adjust;
Reset
+
/–
Press or MENU.
32
CTR 2
*
is in the