Settings And Adjustments; Using The Setup Display; General Setup - Sony DVP-FX730 Mode D'emploi

Settings and Adjustments

Using the Setup Display

By using the setup display, you can make
various settings to items such as picture
and sound.
Some discs have stored playback settings,
which take priority.
1
Press OPTIONS when the player
is in stop mode.
The menu display appears.
During Resume Play, you cannot use
the setup display. Press x twice to
clear Resume Play, and press
OPTIONS.
2
Press X/x to select "Setup,"
and press ENTER.
The setup display appears.
setup category

General Setup

Select:
GB
18
INPUT
DISPLAY MENU
ENTER
RETURN OPTIONS
VOLUME
OPEN
PUSH CLOSE
items
TV Display 16 : 9
Angle Mark On
Screen Saver On
PBC On
DivX
Default
Cancel:
ENTER RETURN
3
Press X/x to select the setup
category and press ENTER.
: General Setup (page 18)
Makes the player-related settings.
: Audio Setup (page 19)
Makes the audio settings according to
playback conditions.
: Language Setup (page 20)
Makes the language settings for the
on-screen display or sound track.
: Parental Control (page 20)
Sets the parental control limit.
C/X/x/c
4
ENTER
Select and adjust each of the
following items by pressing X/x
OPTIONS
and ENTER.
RETURN
x
To turn off the setup display
Press OPTIONS or RETURN twice.
General Setup
The default settings are underlined.
◆ TV Display (DVD only)
Selects the aspect ratio of the connected
TV.
4:3
Pan Scan
4:3
Letter Box
16:9
Select this when you connect
a 4:3 screen TV.
Automatically displays a
wide picture on the entire
screen and cuts off the
portions that do not fit.
Select this when you connect
a 4:3 screen TV. Displays a
wide picture with bands on
the upper and lower portions
of the screen.
Select this when you connect
a wide-screen TV or a TV
with a wide mode function.